

















Pairs well with
What this kit includes
Included as standard:
Choose one (required):
Optional extras:
Downpipe / Link pipe set (SS) was tested and developed
Akrapovic Exhaust System for Audi RS6 Avant/RS7 Sportback (C8)
Akrapovic Evolution Line (Titanium) for Audi RS 6 Avant / RS 7 Sportback / Performance (C8) - OPF/GPF 2023 (S-AU/T/1H)
Manufactured using high-grade lightweight titanium, the Evolution Line exhaust system features a specially designed layout with one central and two side mufflers and a collector made from titanium, all leading from stainless steel link pipes with a larger diameter compared to stock and custom-made flex tubes, fully insulated where they attach to the downpipes. A valve on each side muffler controls the flow of gases and aids the fantastic sound produced by the system. Each valve has a housing cast in Akrapovic’s in-house foundry, as does the complex active X-connection, which also features a valve for controlling the exhaust pulses from both sides of the engine. The system is finished with unique carbon fibre/titanium tailpipes – one on each side – with an eye-catching design that has never been used before, with the handmade dynamically shaped carbon fibre outer sleeve perfectly aligned with the sandblasted and coated titanium inner, all giving a powerful and sporty conclusion to this stunning exhaust system.
Designed to supply a soundtrack that has been acoustically tuned to perfection at every rev point to give an aural delight from the low-down rumble, through a strong mid-range and onto a high frequency top end with distinctive feel of Akrapovic’s racing heritage, all added to the increased excitement where every downshift is accompanied a sharp rumble. The system has been tuned to provide the occupants the comfort of driving like an everyday commuter with no unwanted drone or excessive noise. Akrapovic has conducted tests on its in-house dyno with the Evolution Line (Titanium) exhaust system, using an Audi RS 6 Avant Performance(C8) with the stock Audi Sport exhaust system for comparison, and a power gain of 15.7 hp (m) at 6150 rpm and a torque increase of 17.9 Nm at 6150 rpm were achieved under controlled conditions and with a weight saving of over 20% against the stock system.
This is an ECE compliant system that is a serious performer in all areas. Further changes can be made with the addition of the optional Downpipe / Link pipe set (SS), increased exhaust tuning, and the optional Akrapovic Sound Kit to control the valves in the exhaust and give greater flexibility in the sound the exhaust produces. To give the Evolution Line (Titanium) an even greater visual impact, a handmade carbon fibre diffuser in matte or glossy is available as an option to provide that special finish.
The Link pipe set (SS) L-AU/SS/8/1 s a mandatory product to the Evolution Line (Titanium) S-AU/T/1H. The system is split into two codes because of packaging requirements.
If the Evolution Line exhaust system is combined with the Downpipe / Link pipe set (SS), the link pipe set L-AU/SS/8/1 is not needed. In this case, the ECE type approval is not valid anymore, and remapping the ECU is mandatory when it is fitted. With the installation of Akrapovic Sound Kit, ECE type approval for the Evolution Line (Titanium) exhaust system is not valid.
ECE type approval is only valid for cars equipped with otto/gasoline particulate filter.
Mandatory Components:
Akrapovic Downpipe / Link Pipe Set (SS) for Audi C8 RS6 / RS7 (DP/L-AU/SS/1)
together with Evolution Line (Titanium) system.
If the Evolution Line exhaust system is combined with the Downpipe / Link pipe set (SS), the link pipe sets L-AU/SS/6 or L-AU/SS/8 are not needed.
When combined with the Evolution Line (Titanium) exhaust system the addition of the optional stainless steel Downpipe / Link pipe set (SS) will deliver a unique sound experience: from a low-down rumble to a strong mid-range V8 character and high frequency top end with the recognisable Akrapovic racing sound. The stainless steel downpipes, with sporty 200 cpsi catalytic converters, are insulated to prevent overheating the surrounding parts, and the stainless steel link pipes that have been developed to fit on Akrapovic downpipes feature custom made flex tubes and full insulation where they connect to the downpipes.
The fitting of this optional product will cancel ECE type approval for the Evolution Line (Titanium) exhaust system and remapping the ECU is mandatory.
THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.
Akrapovic Link Pipe Set (SS) for Audi RS 6 Avant / RS 7 Sportback Performance (C8) - OPF/GPF 2023 (L-AU/SS/8/1)
The Link pipe set (SS) L-AU/SS/8/1 is a mandatory product to the Evolution Line (Titanium) S-AU/T/1H. The system is split into two codes because of packaging requirements.
If the Evolution Line exhaust system is combined with the Downpipe / Link pipe set (SS), the link pipe set L-AU/SS/8/1 is not needed.
Optional Components:
Akrapovic Sound Kit for Audi C8 RS6 / RS7 (P-HF1282)
The optional Akrapovic Sound Kit enables owners of selected Akrapovic car exhausts to control the sound of the system from the cockpit of their machine. Using Akrapovic technology, drivers can easily switch between the quiet mode and a sportier sound. With the use of a receiver (already included in evolution system) to drive the actuators that open or close the valves at the end of the exhaust system, drivers can use the Sound Remote Controller to regulate the valves.
With the use of the optional Akrapovic Sound Kit, the ECE type approval is no longer valid.
Pictures are symbolic.

Akrapovic Exhaust System - OPF Audi RS6 Avant/RS7 Sportback / Performance (C8)
At Heasmans, we understand the thrill of motorsport and the importance of perfect preparation. That's why we offer comprehensive track preparation services designed to optimize your race car's performance and safety. Our expert team, equipped with the latest technology and a wealth of experience, ensures that your vehicle is race-ready, whether you're a seasoned competitor or just starting out. Dive into our suite of services and discover how we can elevate your racing experience.
Corner-weight adjustments, also known as balancing or scaling, are essential for any vehicle aiming to achieve optimal performance, handling, and stability. This process involves adjusting the weight distribution across all four wheels, ensuring that each carries an equal part of the car’s total weight. Ideal for racing enthusiasts, track-day heroes, and those who demand precision in their vehicle’s handling, corner-weight adjustments can significantly impact your driving experience.
Wheel alignment is not just about a smoother ride; it’s a vital service that affects your vehicle’s handling, fuel efficiency, and tire lifespan. Misalignment can lead to uneven tire wear, poor fuel economy, and potentially unsafe driving conditions. Regular checks ensure your vehicle performs at its best.
Ensuring your vehicle operates at its best is not just about performance; it's about safety. At Heasmans, our dedicated Safety and Spanner Checks are designed to give you complete peace of mind on the road. With a team of experienced professionals, we provide thorough inspections and necessary adjustments to maintain your vehicle's reliability and performance.
When it comes to enhancing your vehicle's performance and aesthetics, the choice of wheels plays a pivotal role. At Heasmans, we understand this better than anyone. That's why we offer an exclusive collection of premium wheels from the world's most renowned brands like Vossen Wheels, HRE Wheels, Novitec Wheels, and Mansory Wheels, among others. Each brand we offer stands as a testament to our commitment to quality, innovation, and design.
We specialize in elevating the aesthetics and functionality of your vehicle through our premium body styling services. Our expert team is passionate about transforming your car into a statement piece that reflects your unique style while ensuring it stands out on the road.
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
Contact Us
Use this text to answer questions in as much detail as possible for your customers.