H&R Wheel Spacers - Ford RANGER Type PX1,2,3
Shipped Australia wide, or fitted in our Sydenham workshop
Ask the workshop on (02) 9557 3739
H&R TRAK+ Wheel Spacers for the Ford RANGER Type PX1,2,3.
About the H&R TRAK+ Wheel Spacers
TRAK+ spacers push the wheels outward to widen the track and fill the guards. Each pair covers one axle, and the sizes are quoted per axle with the amount each side in brackets, so a 20mm spacer moves each wheel out 10mm.
They are hub centric, machined from forged aluminium, and supplied with the extended bolts sized to suit the spacer chosen. Running a different width front and rear is normal: add the front size, then add the rear size as a second item, and each pair arrives with the right bolts.
Specification
- 40mm per axle (20mm per side), part 40106930, no extended bolts needed
- 50mm per axle (25mm per side), part 50106930, no extended bolts needed
- 60mm per axle (30mm per side), part 60106930, no extended bolts needed
- Hub centric
- Machined from forged aluminium
- Supplied as a pair, enough for one axle
- Silver or black anodised finish
- Part number 40106930
Fitment
- Ford Ranger T6 Ute, 2015 to 2022
What you receive
- 2 x H&R TRAK+ wheel spacers (one axle)
- Fitting instructions
This spacer needs no extended bolts.
Shipped Australia wide, with fitting available in our workshop. H&R warranty applies.
Shipped to you
We ship Australia wide. Stocked parts usually leave within 2 business days. Special order parts are confirmed with a lead time when you order.
Fitted at Heasmans
Prefer us to fit it? Tick “Have us fit it” or book a fitting date and we’ll do it in our Sydenham workshop. Suspension work finishes with a wheel alignment, so the vehicle leaves set up properly.
Warranty
The manufacturer’s warranty covers the parts, and we manage any claim for you. If they’re fitted elsewhere, we’ll need proof of fitting by a qualified workshop.
Buy it here, and we’ll fit it
Most places post you a box. We fit it in our own Sydenham workshop, set it up and check it before you drive out.
- Book a date We’ll confirm a time that suits
- Fitted properly By our own workshop team
- Checked before you leave Wheel alignment and a final check
Fitting for this product
Book a fitting date455-463 Princes Highway, Sydenham NSW · Mon to Fri, 9:00am to 5:30pm
Not sure this is the right part?
Tell us how you use the vehicle and what you carry, and we’ll tell you if something else suits better, even if it’s cheaper.
Or call (02) 9557 3739
We reply Monday to Friday, 9:00am to 5:30pm.
Questions we get asked
Do I need new springs as well?
Some kits include springs and some are dampers only. The “What you receive” list on each product says which. If you want lift or carry extra weight, tell us the height and load and we’ll match the springs to the dampers.
Do I need an alignment afterwards?
Yes. Changing the ride height changes the alignment, so book one in after fitting. If we fit it, the alignment is done before you leave.
Will it affect my warranty?
The parts carry the manufacturer’s warranty, and we manage any claim for you. If they’re fitted elsewhere, we’ll need proof they were fitted by a qualified workshop.
What if I’m not sure which kit suits my car?
Use the form above or call (02) 9557 3739. Tell us what’s on the back and how you use the vehicle, and we’ll recommend the right kit, even if it’s the cheaper one.
Can I return it?
Unopened, unfitted Bilstein and Polyair parts can be returned within 30 days of delivery, with a 20% restocking fee and you covering return freight. Special order parts can’t be returned for change of mind.