Eventuri Inlet Plenum - BMW E9X M3 (Carbon, gloss)
Shipped Australia wide, or fitted in our Sydenham workshop
Ask the workshop on (02) 9557 3739
Eventuri Inlet Plenum for the BMW E9X M3, carbon, gloss.
About Eventuri intake systems
Eventuri build intake systems around the Venturi principle: the filter sits in a carbon housing that narrows smoothly into the intake tube, so the air accelerates without hitting a step, a corner or a rubber join. That smoothness is what separates their systems from a cone filter on a pipe.
The housings are pre-preg carbon, which insulates the intake air from engine bay heat, and the systems are sealed and fed by ducts or a scoop so the engine draws cool air rather than hot air off the radiator.
Introducing our E9X M3 Carbon Fiber Plenum. Made from 100% high grade prepreg carbon including the internal trumpets, this plenum replaces the stock plastic version and unleashes the roar of the naturally aspirated BMW V8 engine. Since the trumpet lengths are tuned by BMW to the internal volume, changing this could result in a loss of performance so we kept the same volume to not upset the way the car drives in terms of power delivery. Although there isn't a performance gain from the carbon plenum, the induction sound generated takes the driving experience of the M3 to a whole new level. The raw V8 rumble gives the M3 an almost CSL like sound and is truly an intoxicating experience. We went through several iterations using different carbon thicknesses to fine tune the sound and the resulting plenum generates an almost unbelievable induction volume and tone.
This plenum can be used with the OEM airbox or any aftermarket intake system. Our own additional E9X M3 intake system provides a genuine performance gain and can be found HERE.
The Eventuri E9X M3 Carbon inlet plenum is crafted from 100% prepreg carbon fiber and consists of a number of components engineered to perform a specific purpose:
A lot of attention was given to the fitment of the plenum to ensure that it fits just like OEM. The precision machined flanges allow for easy placement and installation of the plenum. Furthermore the CNC machined temperature sensor boss allows for an exact and secure fit of the sensor - just like the OEM version. No corners were cut in the development of this plenum and together with our additional E9X M3 intake system, the transformation of the car is astounding.
Specification
- Finish and options: carbon, gloss
- Pre-preg carbon fibre construction
- Sealed housing with a bespoke high flow filter
- Listed by Eventuri for: BMW M3 (E92) Coupe Competition 2010-2013; BMW M3 (E92) Coupe M3 2007-2013; BMW M3 (E92) Coupe M3 Pure 2012-2013; BMW M3 (E90) Sedan M3 2008-2011; BMW M3 (E93) Convertible Competition 2010-2013; BMW M3 (E93) Convertible M3 2008-2013
- Part number EVE-E9X-CF-PLM
Fitment
- BMW M3, 2007 to 2013
What you receive
- Carbon Fibre base and Lid
- 8 x Carbon trumpets with OEM specifications
- 8 x CNC machined aluminium flanges
- CNC machined temperature sensor boss
- CNC machined breather boss
Shipped Australia wide, with fitting available in our workshop. Eventuri warranty applies.
Shipped to you
We ship Australia wide. Stocked parts usually leave within 2 business days. Special order parts are confirmed with a lead time when you order.
Fitted at Heasmans
Prefer us to fit it? Tick “Have us fit it” or book a fitting date and we’ll do it in our Sydenham workshop. Suspension work finishes with a wheel alignment, so the vehicle leaves set up properly.
Warranty
The manufacturer’s warranty covers the parts, and we manage any claim for you. If they’re fitted elsewhere, we’ll need proof of fitting by a qualified workshop.
Buy it here, and we’ll fit it
Most places post you a box. We fit it in our own Sydenham workshop and check it before you drive out.
- Book a date We’ll confirm a time that suits
- Fitted properly By our own workshop team
- Checked before you leave Torque checked, with an alignment where it’s needed
Fitting for this product
Book a fitting date455-463 Princes Highway, Sydenham NSW · Mon to Fri, 9:00am to 5:30pm
Not sure this is the right part?
Tell us your car and what you’re after, and we’ll tell you if something else suits better, even if it’s cheaper.
Or call (02) 9557 3739
We reply Monday to Friday, 9:00am to 5:30pm.
Questions we get asked
Will this fit my car?
Check the Fitment list on the product, or use Shop by vehicle at the top of the page. If you’re not sure, send us your vehicle details or rego with the form above and we’ll confirm before you order.
Can you fit it for me?
Yes. We fit what we sell in our Sydenham workshop. Tick “Have us fit it” when you order, or ask us for a fitting date.
Is it a special order?
Some brands are stocked locally and others are ordered in from overseas. If it’s a special order, we confirm the lead time when you order, and special orders are paid in full before we place them.
Will it affect my warranty?
The manufacturer’s warranty covers the part, and we manage any claim. If it’s fitted elsewhere, we’ll need proof it was fitted by a qualified workshop.
Can I return it?
Change-of-mind returns are only available on selected locally stocked brands, such as H&R and Bilstein: unopened and unfitted, within 30 days of delivery, with a 20% restocking fee and you covering return freight. Imported and special order parts can’t be returned for change of mind.