Akrapovic Exhaust System - BMW M3 (E92, E93, E90)
Shipped Australia wide, or fitted in our Sydenham workshop
Ask the workshop on (02) 9557 3739
Akrapovic Exhaust System for the BMW M3 (E92, E93, E90).
About Akrapovič exhaust systems
An Akrapovič exhaust system replaces the factory system from the manifold or the catalyst back, and is developed for one car rather than adapted. The work goes into three things at once: how much the system weighs, how the gas flows through it, and what the car sounds like at every point in the rev range.
Components are made from titanium, stainless steel or Inconel depending on the system, with cast parts produced in Akrapovič's own foundry. The material for this system is named in the title and the specification.
The Evolution performance exhaust system for the BMW M3 consists of dual-outlet mufflers, flow-optimized link pipes, and an X-pipe that incorporates high-flow 100 cpsi sports catalytic convertors and resonators. The power and torque gains of the BMW M3 with the Evolution system are just amazing. A substantial increase is detected over a very wide rpm range, and so it increases responsiveness during all phases of driving. Together with incredible weight savings, the Evolution system dramatically changes the power-to-weight ratio. Our goal was to design a system that delivers a deep, rich growl at cruising speeds while also allowing the driver to enjoy an aggressive roar when driving hard. Complete the look with a set of two exquisite tailpipes in titanium or carbon fibre.
When installing Akrapovic aftermarket optional down pipes with sports catalytic converters or without catalytic converters, which are developed for use on closed tracks only, remapping the ECU is mandatory. When installing Akrapovic aftermarket exhaust system that was developed for use on closed tracks, we recommend remapping the ECU in order to prevent potential »check engine light« warning signals.
Specification
- Power: 287.8 kW at 7,870 rpm standard, 301.7 kW at 7,900 rpm with Akrapovič, up to + 16.3 kW at 5,730 rpm
- Torque: 394.0 Nm at 3,680 rpm standard, 420.4 Nm at 3,810 rpm with Akrapovič, up to + 34.7 Nm at 4,890 rpm
- Weight: 45.1 kg standard, 21.2 kg with Akrapovič, 23.9 kg saved
- Weight saving: 53.0%
- Sound level: 84 dB at 6,200 rpm standard, 93.5 dB at 6,200 rpm with Akrapovič
- Listed by Akrapovič for: BMW M3 (E90) Sedan M3 2008-2011BMW M3 (E92) Coupe M3 2007-2013BMW M3 (E93) Convertible M3 2008-2013; BMW - M3 (E92, E93) (2007 - 2013)BMW - M3 (E90) (2007 - 2013)BMW - M3 (E92, E93) (2007 - 2013)
- Part number ME-BM/T/2-KIT
Fitment
- BMW M3, 2007 to 2013
What you receive
- Evolution Line (Titanium) (ME-BM/T/2)Carbon Tail Pipe Set (TP-CT/3)
This product does not meet emission compliance requirements for street or highway use.
Shipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.
Shipped to you
We ship Australia wide. Stocked parts usually leave within 2 business days. Special order parts are confirmed with a lead time when you order.
Fitted at Heasmans
Prefer us to fit it? Tick “Have us fit it” or book a fitting date and we’ll do it in our Sydenham workshop. Suspension work finishes with a wheel alignment, so the vehicle leaves set up properly.
Warranty
The manufacturer’s warranty covers the parts, and we manage any claim for you. If they’re fitted elsewhere, we’ll need proof of fitting by a qualified workshop.
Buy it here, and we’ll fit it
Most places post you a box. We fit it in our own Sydenham workshop and check it before you drive out.
- Book a date We’ll confirm a time that suits
- Fitted properly By our own workshop team
- Checked before you leave Torque checked, with an alignment where it’s needed
Fitting for this product
Book a fitting date455-463 Princes Highway, Sydenham NSW · Mon to Fri, 9:00am to 5:30pm
Not sure this is the right part?
Tell us your car and what you’re after, and we’ll tell you if something else suits better, even if it’s cheaper.
Or call (02) 9557 3739
We reply Monday to Friday, 9:00am to 5:30pm.
Questions we get asked
Will this fit my car?
Check the Fitment list on the product, or use Shop by vehicle at the top of the page. If you’re not sure, send us your vehicle details or rego with the form above and we’ll confirm before you order.
Can you fit it for me?
Yes. We fit what we sell in our Sydenham workshop. Tick “Have us fit it” when you order, or ask us for a fitting date.
Is it a special order?
Some brands are stocked locally and others are ordered in from overseas. If it’s a special order, we confirm the lead time when you order, and special orders are paid in full before we place them.
Will it affect my warranty?
The manufacturer’s warranty covers the part, and we manage any claim. If it’s fitted elsewhere, we’ll need proof it was fitted by a qualified workshop.
Can I return it?
Change-of-mind returns are only available on selected locally stocked brands, such as H&R and Bilstein: unopened and unfitted, within 30 days of delivery, with a 20% restocking fee and you covering return freight. Imported and special order parts can’t be returned for change of mind.