CSF Part 8233

CSF Cooling Part - BMW S58 Level-Up Charge-Air-Cooler Manifold

$14,839 inc GST
Finish Raw
Ask about this product

Shipped Australia wide, or fitted in our Sydenham workshop 

Ask the workshop on (02) 9557 3739 

CSF Cooling Part for the BMW S58 Level-Up Charge-Air-Cooler Manifold.

About CSF intercoolers

A CSF intercooler cools the charge air after the turbo, and cooler charge air means denser air and less heat soaked into the inlet. CSF build theirs in aluminium with a bar and plate or tube and fin core depending on the application, sized to the car rather than oversized for the look of it.

They fit in the factory location and use the original mounting points, so nothing has to be cut.

With the larger and more efficient intercooler performance, lower pressure drop, included fuel rail & kit for top feed port injection, and other industry-leading features, the CSF Level-Up Manifold allows S58 owners to maximise performance.

BMW M2 (G87) Coupe CS 2025-currentBMW M2 (G87) Coupe M2 2023-currentBMW M3 (G80) Sedan CS 2023-currentBMW M3 (G80) Sedan Competition 2021-currentBMW M3 (G80) Sedan Competition xDrive 2021-currentBMW M3 (G80) Sedan M3 2021-currentBMW M3 (G81) Wagon CS 2025-currentBMW M3 (G81) Wagon Competition xDrive 2022-currentBMW M4 (G82) Coupe CSL 2022-2023BMW M4 (G82) Coupe Competition 2021-currentBMW M4 (G82) Coupe Competition xDrive 2021-currentBMW M4 (G82) Coupe M4 2021-currentBMW M4 (G83) Convertible Competition xDrive 2021-currentBMW X3 M (F97) SUV Competition xDrive 2019-2024BMW X3 M (F97) SUV X3 M 2019-2024BMW X4 M (F98) SUV Competition xDrive 2019-2024BMW X4 M (F98) SUV X4 M 2019-2024

Specification

  • Reduced Intake Air Temperatures (IATs) compared to OEM
  • Less pressure drop compared to OEM core
  • Ultra strong CNC Billet construction replaces weak plastic tanks with crimped-on gasket sealing core
  • High performance bar/plate intercooler core by PWR pressure tested to 120psi
  • KYLEX thermal spacer for the best resistance to heat soak of the manifold.
  • Perimeter pad machined into top of intake manifold for up to 3 additional sensors
  • Rear of the intake manifold has been clearance for easy access to the engine oil filter
  • CNC front wire harness bracket for OEM fitment and slotted easy installation
  • Upper crank case ventilation adapter and Lower crank case ventilation adapter
  • Integrated port injection with fuel rail (provided with block-off bungs if not running port injection)
  • Integrated nitrous ports (provided with block-off bungs if not running nitrous)
  • Integrated hose stand-offs for proper routing of EVAP hoses across manifold
  • Integrated coolant reservoir mounting locations on rear of manifold for perfect fitment
  • Various wire harness provisions for perfect routing of wiring harness around manifold
  • Integrated bleeder screw
  • OEM teeth on intake manifold flange for secure seating of gaskets
  • Machined coolant hose quick connects
  • Removable machined engine cover pin for perfect fitment with engine cover
  • Raw Billet Aluminium Finish
  • All necessary brackets, hardware, and instructions to install
  • Limited Lifetime Warranty
  • Listed by CSF for: 2023 BMW M2; 2022 BMW M3; 2021-2023 BMW M3 Competition; 2023 BMW M3 Competition xDrive; 2021-2022 BMW M4; 2021-2023 BMW M4 Competition; 2021-2023 BMW M4 Competition xDrive; 2020-2023 BMW X3 M; 2021-2022 BMW X3 M Competition; 2020-2021 BMW X4 M; 2020-2021 BMW X4 M Competition
  • Offered in 3 versions, listed as options on this page
  • Part number 8233

Fitment

  • BMW M2, 2023 to current
  • BMW M3, 2021 to current
  • BMW M4, 2021 to current
  • BMW X3, 2019 to 2024
  • BMW X4, 2019 to 2024

What you receive

One cooling part, as described above.

Please confirm fitment with us before ordering.

Shipped Australia wide, with fitting available in our workshop. CSF warranty applies.

Buy it here, and we’ll fit it

Most places post you a box. We fit it in our own Sydenham workshop and check it before you drive out. 

  1. Book a date We’ll confirm a time that suits
  2. Fitted properly By our own workshop team
  3. Checked before you leave Torque checked, with an alignment where it’s needed

Fitting for this product

Book a fitting date

455-463 Princes Highway, Sydenham NSW · Mon to Fri, 9:00am to 5:30pm

Not sure this is the right part?

Tell us your car and what you’re after, and we’ll tell you if something else suits better, even if it’s cheaper.

Or call (02) 9557 3739

We reply Monday to Friday, 9:00am to 5:30pm. 

Questions we get asked

Will this fit my car?

Check the Fitment list on the product, or use Shop by vehicle at the top of the page. If you’re not sure, send us your vehicle details or rego with the form above and we’ll confirm before you order.

Can you fit it for me?

Yes. We fit what we sell in our Sydenham workshop. Tick “Have us fit it” when you order, or ask us for a fitting date.

Is it a special order?

Some brands are stocked locally and others are ordered in from overseas. If it’s a special order, we confirm the lead time when you order, and special orders are paid in full before we place them.

Will it affect my warranty?

The manufacturer’s warranty covers the part, and we manage any claim. If it’s fitted elsewhere, we’ll need proof it was fitted by a qualified workshop.

Can I return it?

Change-of-mind returns are only available on selected locally stocked brands, such as H&R and Bilstein: unopened and unfitted, within 30 days of delivery, with a 20% restocking fee and you covering return freight. Imported and special order parts can’t be returned for change of mind.