CSF Cooling Part - F8X M3 / M4 / M2 Comp Top Mount Charge-Air-Cooler
Shipped Australia wide, or fitted in our Sydenham workshop
Ask the workshop on (02) 9557 3739
CSF Cooling Part for the F8X M3 / M4 / M2 Comp Top Mount Charge-Air-Cooler.
About CSF intercoolers
A CSF intercooler cools the charge air after the turbo, and cooler charge air means denser air and less heat soaked into the inlet. CSF build theirs in aluminium with a bar and plate or tube and fin core depending on the application, sized to the car rather than oversized for the look of it.
They fit in the factory location and use the original mounting points, so nothing has to be cut.
The CSF Charge-Air-Cooler boasts a 60% larger core size than factory, greatly increasing the capacity for heat transfer from the hot charge air. Paired with the CSF Heat Exchanger (CSF #8075) the system is able lower your F8X's IATs.
BMW M2 (F87) Coupe CS 2020-2021BMW M2 (F87) Coupe Competition 2018-2021BMW M3 (F80) Sedan CS 2018-2018BMW M3 (F80) Sedan Competition 2016-2018BMW M3 (F80) Sedan M3 2015-2018BMW M4 (F82) Coupe CS 2017-2019BMW M4 (F82) Coupe Competition 2016-2020BMW M4 (F82) Coupe M4 2015-2020BMW M4 (F83) Convertible Competition 2017-2020BMW M4 (F83) Convertible M4 2015-2020
Specification
- World's 1st Cast Endtank Designed Top Mount Charge-Air-Cooler for the BMW S55 Engine in the BMW F80 M3, F82/F83 M4, and F87 M2 Competition
- Multiple Air Dividers Cast Into Both Hot/Cold Side Endtanks for optimised Air Flow Through the Custom Designed CSF Liquid-to-Air Intercooler Core (CFD Analysis and Testing Completed to Ensure Optimal Performance)
- 60% Increase in Core Size Compared to the OEM Cooler
- Left/Right, Cross-Flow, Dual-Pass Core Configuration with 2-Stage Water Cooling for Maximum Efficiency and Intake Temperature Reduction (vs. OEM Single-Pass Vertical-Flow Design)
- Designed with 3D Scanning/Rapid Prototype Technology to Ensure Precise Fitment and Maximum Surface Area Utilization
- Drop-in Fit Design for an Easy & Quick Plug-and-Play Installation, Complete with OEM-Style "Quick-Connect" Water Connections and Sensor Ports
- Finished with a Professional "Crinkle Black" Powder-Coated Finish (Available in Raw Aluminium with Option for Custom Powder-Coating - CSF #8082R)
- Lifetime Warranty
- Offered in 2 versions, listed as options on this page
- Part number 8082
Fitment
- BMW M2, 2018 to 2021
- BMW M3, 2015 to 2018
- BMW M4, 2015 to 2020
What you receive
One cooling part, as described above.
Please confirm fitment with us before ordering.
Shipped Australia wide, with fitting available in our workshop. CSF warranty applies.
Shipped to you
We ship Australia wide. Stocked parts usually leave within 2 business days. Special order parts are confirmed with a lead time when you order.
Fitted at Heasmans
Prefer us to fit it? Tick “Have us fit it” or book a fitting date and we’ll do it in our Sydenham workshop. Suspension work finishes with a wheel alignment, so the vehicle leaves set up properly.
Warranty
The manufacturer’s warranty covers the parts, and we manage any claim for you. If they’re fitted elsewhere, we’ll need proof of fitting by a qualified workshop.
Buy it here, and we’ll fit it
Most places post you a box. We fit it in our own Sydenham workshop and check it before you drive out.
- Book a date We’ll confirm a time that suits
- Fitted properly By our own workshop team
- Checked before you leave Torque checked, with an alignment where it’s needed
Fitting for this product
Book a fitting date455-463 Princes Highway, Sydenham NSW · Mon to Fri, 9:00am to 5:30pm
Not sure this is the right part?
Tell us your car and what you’re after, and we’ll tell you if something else suits better, even if it’s cheaper.
Or call (02) 9557 3739
We reply Monday to Friday, 9:00am to 5:30pm.
Questions we get asked
Will this fit my car?
Check the Fitment list on the product, or use Shop by vehicle at the top of the page. If you’re not sure, send us your vehicle details or rego with the form above and we’ll confirm before you order.
Can you fit it for me?
Yes. We fit what we sell in our Sydenham workshop. Tick “Have us fit it” when you order, or ask us for a fitting date.
Is it a special order?
Some brands are stocked locally and others are ordered in from overseas. If it’s a special order, we confirm the lead time when you order, and special orders are paid in full before we place them.
Will it affect my warranty?
The manufacturer’s warranty covers the part, and we manage any claim. If it’s fitted elsewhere, we’ll need proof it was fitted by a qualified workshop.
Can I return it?
Change-of-mind returns are only available on selected locally stocked brands, such as H&R and Bilstein: unopened and unfitted, within 30 days of delivery, with a 20% restocking fee and you covering return freight. Imported and special order parts can’t be returned for change of mind.